Vol. 10 No. 2 (2023): October 2023

This issue has been available online since 31st October 2023 for the regular issue of October 2023. All articles in this issue were authored/co-authored by 34 authors from Indonesia. 
DOI: https://doi.org/10.31963/intek.v10i2
Published: 2023-12-06

Cover

ARTICLES

  • Plucker Machine Design on Halal Mobile Poultry Slaughterhouse (MPSH) Prototype

    Dhimas Satria, Dwinanto Dwinanto, Mekro Permana Pinem, Muhammad Iman Santoso, Intan Nazwa
    84-88
    DOI: https://doi.org/10.31963/intek.v10i2.4468

  • Monitoring the Condition of the 20 kV Switching Substation in the Tual Rayon Saumlaki Area

    Andareas Pangkung, Sonong Sonong, Makmur Saini, Muhammad Ruswandi Djalal, M Fachmi Jamal
    89-95
    DOI: https://doi.org/10.31963/intek.v10i2.4626

  • Implementation of the North West Corner Rule and Loop Construction Method to Minimize Material Distribution Cost on Ameroro Dam Access Road Project (Package II)

    Suriati Abd. Muin, Watono Watono, Ishak Gani, Aulia Muhammad, Sudarmawanty Sudarmawanty
    96-105
    DOI: https://doi.org/10.31963/intek.v10i2.4615

  • Design of Experiments (Doe) on Suspension Test Equipment of One Part Of A Vehicle Wheel Using The Taguchi Method

    Christof Geraldi Simon, Formanto Paliling, Risa Lasarus, Lery Alfriany Salo, Frans Robert Bethony, Simon ka’ka
    106-113
    DOI: https://doi.org/10.31963/intek.v10i2.4581

  • Comparison of The Pull Strength of Sisal Lamina Matrix Polymer Fiber Composite Materials (Agave Sisalana)

    FIkran Fikran, Christof Geraldi Simon, Simon ka’ka
    114-120
    DOI: https://doi.org/10.31963/intek.v10i2.4582

  • Performance Test Of Myristica Fragrans Dryer Using A Heat System On An Electric Stove

    Festo Andre Hardinsi, Muh. Subhan, Osmar Buntu Lobo
    121-125
    DOI: https://doi.org/10.31963/intek.v10i2.4482

  • Tensile Analysis of Epoxy Resin Composite Material with Petung Bamboo Strip Reinforcement

    Frans Robert Bethony, Marthina Pineng, Formanto Paliling, Christof Geraldi Simon
    126-130
    DOI: https://doi.org/10.31963/intek.v10i2.4578

  • Reducing Cycle Time in the Manufacturing Process of Circular Pattern Interpolar Products (CPIP) Using Special Fixtures on a 3-Axis CNC Machine

    Muhammad Luthfi Sonjaya, Massriyady Massaguni, Muh. Nurul Haq Amaluddin
    131-136
    DOI: https://doi.org/10.31963/intek.v10i2.4439