Tuning the Structural and Textural Properties of H-ZSM-5 through Si/Al Molar Ratio Variation
DOI:
https://doi.org/10.31963/intek.v13i2.6702Abstract
One of the most widely used MFI-type zeolites is ZSM-5. The silicon-to-aluminum (Si/Al) molar ratio, which determines the acidity of the framework and the textural architecture that is formed, has a large impact on the catalytic and adsorptive performance of this zeolite. In this study, two ZSM-5 samples with Si/Al molar ratio of 80 and 120 (Z-T80-TE-170 and Z-T120-TE-170) were hydrothermally synthesized at the same crystallization temperature of 170°C with tetrapropylammonium hydroxide (TPAOH) as the structure-directing agent and tetraethyl orthosilicate (TEOS) as the silica source. The samples were examined by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and N2 physisorption (BET, BJH, DFT and t-plot analysis).Downloads
Published
2026-10-30
Issue
Section
ARTICLES
License
Copyright (c) 2026 Ridhawati Thahir, Fazlena Hamzah, Joice Manga, Mimin Septiani, Dian Ranggina

This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published in INTEK Journal remain under the copyright of the Authors and are made available as Open Access, allowing them to be read, downloaded, and cited in other scholarly works in accordance with applicable citation standards.














