SLAG NIKEL SEBAGAI BAHAN SUBTITUSI PADA KARAKTERISTIK CAMPURAN AC-BASE

Authors

  • Andi Batari Angka
  • Kushari Kushari

Abstract

The objective of this research is to know the characteristic of AC-BASE mixture using nickel slag as a materialof rock ash substitution with variation 0%, 25%, 50%, 75% and 100%, and optimum asphalt content. The method usedis experimentation in laboratory through mix design, making test object and Marshall test. The results of the research onthe characteristics of AC-BASE mixture using nickel slag as a material of ash substitution with 25%, 50%, 75% and100% variations obtained by the maximum stability value, in the substitution of 25% slag nickel by 1398.34 kg, themaximum value of flow, on the substitution of 25% nickel slag substitution of 3.16 mm, the maximum value of VIM,obtained at a substitution of 100% nickel slag substitution with a value of 6.611%, the maximum value of VMA, isobtained on a 100% nickel slag substitution variation of 18.691%, the maximum value of VFB, variation of 25% nickelslag substitution of 79.982%, maximum value of Marshall coefficient, obtained on variation of 25% slag nickelsubstitution of 442.51 kg / mm. Optimum Asphalt Content (OAC) is suitable for use in pavement layer mixture that is5.60%.

References

Sugiri Saptahari, (2005), Penggunaan Terak Nikel Sebagai Agregat pada Beton Mutu Tinggi. Tesis Program Magister,

Institut Teknologi Bandung.

Sukiman, Silvia, (1992), Perkerasan Lentur Jalan Raya, Bandung.

Ali Achmadi, (2009), Kajian Beton Mutu Tinggi Menggunakan Slag Nikel Sebagai Agregat Halus Dan Kasardengan

Aplikasi Superplasticizer Dan Silicafume. Tesis Program Magister, Universitas Diponegoro Semarang.

SNI 06-2441-1991 : Metode Pengujian Berat Jenis Aspal Padat.

SNI 06-2456-1991 : Metode Pengujian Penetrasi Bahan-Bahan Bitumen.

SNI 06-2432-1991 : Metode Pengujian Daktilitas Bahan-Bahan Aspal.

SNI 06-2434-1991 : Metode Pengujian Kelekatan Agregat Terhadap Aspal.

SNI 06-2434-1991 : Metode Pengujian Titik Lembek Aspal.

SNI 03-6819-2002 : Spesifikasi Agregat Halus Untuk Campuran Beraspal.

SNI 2417-2008 : Metode Pengujian Keausan Agregat Dengan Mesin Abrasi Los Angeles.

Downloads

Published

2018-08-28

Issue

Section

SIPIL & KEAIRAN, TRANSPORTASI, DAN MITIGASI BENCANA