Perancangan Sistem Kontrol dan Monitoring pada Robot Sadetec Berbasis IoT
DOI:
https://doi.org/10.31963/elekterika.v6i1.3481Keywords:
Internet of Things, Wifi, Blynk, NodeMCU, Robot SadetecAbstract
In the era of advanced technology, technology helps various fields of industrial work, agriculture, education, and other fields. Work such as supervising the queue of visitors or counters by utilizing technology can minimize the spread of the Covid-19 virus. Robot Line Follower technology monitors the distance of the visitor queue or counter can minimize the spread of the Covid-19 virus, and its minimalist form is easy for use and storage. Sadistic Robot (Smart Detection Distance for Queue) uses Line Follower technology plus the use Internet and smartphones that can be used by anyone and anywhere, thus monitoring or supervising the queue to maintain a safe distance so as not to be infected with the Covid-19 virus. This research is to create a control and monitoring system to monitor the distance of the queue of visitors or counters using the Internet of Things system or wifi internet network. Utilization in this study using a blynk application found on smartphones. Based on the test results, NodeMCU can connect to the Internet within 10 meters of the internet source. Then, the control system can receive commands from applications with a delay of less than 1 second, and the Blynk application monitoring system can receive sensor data in real-time in conditions of 10 meters.References
D. Arianto and A. Sutrisno, “Kajian Antisipasi Pelayanan Kapal dan Barang di Pelabuhan Pada Masa Pandemi Covid–19,†J. Penelit. Transp. Laut, vol. 22, no. 2, pp. 97–110, 2021, doi: 10.25104/transla.v22i2.1682.
R. N. Putri, “Indonesia dalam Menghadapi Pandemi Covid-19,†J. Ilm. Univ. Batanghari Jambi, vol. 20, no. 2, p. 705, 2020, doi: 10.33087/jiubj.v20i2.1010.
Y. K. Santoso, J. J. Jonatan, P. Millenika, D. A. Fernanda, I. Setyawan, and D. Susilo, “Rancang Bangun Alat Pintar Protokol Kesehatan Covid-19 Terintegrasi,†JST (Jurnal Sains dan Teknol., vol. 10, no. 2, pp. 252–263, 2021, doi: 10.23887/jstundiksha.v10i2.39504.
N. Lumanauw, “Edukasi Dan Implementasi Protokol Clean Health Safety Environtment Melalui We Love Bali Kemenparekfraf Pada Program 10 Sanur – Nusa Penida – Nusa Lembongan – Sanur,†J. Ilm. Hosp. Manag., vol. 11, no. 1, pp. 71–81, 2020, doi: 10.22334/jihm.v11i1.179.
A. Maulana, I. A. Bangsa, and A. Stefanie, “Implementasi Sistem Kontrol Dan Monitoring Pada Drone Skyscraper Berbasis Internet of Things,†2020.
A. Boy Panroy Manullang, Y. Saragih, and R. Hidayat, “Implementasi NodeMCU ESP8266 Dalam Rancang Bangun Sistem Keamanan Sepeda Motor Berbasis IoT,†J. Inform. dan Rekayasa Elektron., vol. 4, no. 2, pp. 163–170, 2021.
R. P. Moniaga, D. Mamahit, and N. M. Tulung, “Rancang Bangun Alat Penyaji Air Otomatis Menggunakan Sensor Jarak Dengan Keluaran Lcd,†E-Journal Tek. Elektro Dan Komput., vol. 4, no. 6, pp. 25–34, 2015.
F. R. Nurlianisa, “Kit Aquascape Berbasis Internet of Things Melalui Aplikasi Blynk dengan Arduino Uno Untuk Pemeliharaan Lilaeopsis Brasiliensis,†Tugas Akhir, vol. 1, pp. 1–46, 2018.
E. C. Sunarto and B. Yulianti, “Rancang Bangun Prototipe Alat Angkut Helikompter Berbasis Arduino,†TESLA J. Tek. Elektro, vol. 20, no. 2, p. 157, 2019, doi: 10.24912/tesla.v20i2.2992.
D. Prasetyo, W. N. Adzilla, and Y. Saragih, “Implementasi Pemantauan Kualitas Udara dengan Menggunakan MQ- 7 dan MQ-131 Berbasis Internet of Things,†J. Electr. Tecnol., vol. 6, no. 1, pp. 18–22, 2021.
