Penerapan Teori Graf pada Topologi Matriks Jaringan Distribusi Radial dalam Menentukan Losses
DOI:
https://doi.org/10.31963/intek.v3i1.5Abstract
Losses in distribution network of electrical power system with radial system topology can be calculated using Graf Theory. Graf Theory uses nodes and branches that are exist in radial network and convert them in matrices equations. This method is used to determine injection current in losses calculation in every single network branch.References
Yusra Sabri “PerencanaanDistribusi Sistem Tenaga
Listrik†ITB 1991.
Erwin Kreywszig “Advance Engineering
Mathematics†1988.
Turan Gonen “Electric Power Distribution System
Engineering†University of Missori ot Colombia 1986.
William H. Kersting “Distribution system Modeling
and Analysis†Includes bibliographical referencesand
indes. ISBN 0-8493-0812-7/2001
Richard E. Brown “Electric Power Distribution
Reliability†ABB Raleigh, North Carolina 2002.
Roy Billintion and Ronald N. Allan “Reliability
Evaluation of Power Systems†university of
saskatchewan college of Engineering Saskatoon,
Saskatchewan, Canada. University of Manchester
Institute of Science and Technology Manchester,
England. 1994.
James j. Burke “Power Distribution Engineering
Fundamental and Applications†department of
Electrical Engineering The Ohio State University
Columbus, Ohio 2000.
IEEE “Recommended Practite for the Desing of
Reliable Industrial and Commercial Power
Systemsâ€(ANSI) IEEE Std 493-1990.
A.A Choundhury and D.O.Koval “Value-based
distribution Systems realibility palnning†IEEE Trans.
Ind.Applcat, vol.34,pp.23-29 jan 1998.
R.E Brown and T.M, Taylor, “Modelling the impact of
substations an distribution reliability†IEEE Power
System. Vol 14,pp 260-265, Jan 2002.
