SAFE LOCK SECURITY PROTOTYPE USING FINGERPRINT AND PIN
DOI:
https://doi.org/10.31963/intek.v11i1.4780Keywords:
Arduino, Key, Fingerprint, Selenoids, Safety boxAbstract
In general, security safe box is currently still using key combination that has some drawbacks. One of the weaknesses is the risk of lossing of the keys and forgetting the lock codes that impact at users of not being able to operate the safe box. Therefore, the researcher is designing a tool that is more practical and safe that can replace the key of security safe box. In the research, the researcher uses the method of fingerprint and a PIN by designing a circuit input tool using the output fingerprint sensor and keypad. For the series of processor,the researcher applies the Arduino microcontroller Uno R3 while for series output the researcher applies three output circuit such as LCD, Buzzer, and Selenoids. Security tool safe box can only be operated by entering PIN and fingerprint which have been registered. Hence, the users do not need to save an object to operate the safe box. Based on the results of testing, this tool is able to open the safe box by inputting 5 registered ID interchangeably as much as 25 times. The Solenoids then are able to operate when they are given voltage > 9, 5V 350 mA to 12V 800 mA.References
Annisya, Lingga Hermanto, dan Robby Candra. 2017. Sistem Keamanan Buka Tutup Kunci Brankas Menggunakan Sidik Jari Berbasis Arduino Mega. Jurnal Informatika Dan Komputer. 22(1). 1–9.
Benny,Muhammad Abiyyu Rama, dan Nurul Rahma Dinda. 2016. Kunci Pengaman Brankas Menggunakan Pin Dan Rfid. Politeknologi. 15(2). 101-110.
Yuliza Eni, dan Toibah Umi Kulsum. 2015. Alat Keamanan Pintu Brankas Berbasis Sensor Sidik Jari Dan Passoword Digital Dengan Menggunakan Mikrokontroler ATMega 16. Jurnal Media Infotama. 11(1). 1–10.
Siswanto, apri, ana tri yulianti and loneli costaner. “Sistem Pengaman Pintu Rumah Dengan Teknologi Biometrik Sidik Jari Berbasis Arduino Home Doorlock Security System With Biometric Fingerprint Based On Arduino.” JPPI. 8(2). 97-107. (2018).
Guntoro Helmi,Yoyo Somantri, dan Erik Haritman. 2013. Rancang Bangun Magnetic Door Lock Menggunakan Keypad Dan Solenoid Berbasis Mikrokontroler Arduino Uno. Electrans. 12(1). 39–48
Muhammad Chamdun, Adian Fatchur Rohim, dan Eko Didik Widianto. 2014. Sistem Keamanan Berlapis pada Ruangan Menggunakan RFID dan Keypad untuk Membuka Pintu Secara Otomatis. Jurnal Teknologi Dan Sistem Komputer. 2(3). 187-194.
Zain, Abdul, Rudi Hartono, and Sri Handani. "Design of Microcontroller Based Fire Detector with Output Warning SMS Information and Automatic Extinguisher." INTEK: Jurnal Penelitian 7, no. 2 (2020): 109-115.
Zain, Abdul, and Arief Muliawan. "Prototipe Pengendali Pintu Darurat Menggunakan Mikrokontroler ATMega 16." INTEK: Jurnal Penelitian 5, no. 2 (2018): 122-129
Zain, Abdul, and Sri Handani. "Sistem Pengontrol Pintu Pagar Dengan Voice Control Berbasis Mikrokontroler." Jurnal Teknologi Elekterika 16, no. 2 (2019): 48-55.
Zain, Abdul. "Kendali Sistem Tegangan Baterai Peralatan 20 kV PT PLN Bontang." Jurnal Teknologi Elekterika 19, no. 1 (2022): 8-15.
Arfittariah, Arfittariah, Abdul Zain, and Akbar Akbar. "Rancang bangun mesin otomatis pencacah mini serabut kelapa (mesin cocopeat)." Jurnal Nasional Komputasi dan Teknologi Informasi (JNKTI) 4, no. 6 (2021): 517-521.
Zain, Abdul. "Rancang Bangun Sistem Proteksi Kebakaran Menggunakan Smoke dan Heat Detector." INTEK: Jurnal Penelitian 3.1 (2016): 36-42.
Downloads
Additional Files
- SISTEM PENGAMAN PINTU RUMAH DENGAN TEKNOLOGI BIOMETRIK SIDIK JARI BERBASIS ARDUINO
- Design of Microcontroller Based Fire Detector with Output Warning SMS Information and Automatic Extinguisher
- PROTOTYPE PENGENDALI PINTU DARURAT MENGGUNAKAN MIKROKONTROLER ATMEGA16
- Sistem Pengontrol Pintu Pagar Dengan Voice Control Berbasis Mikrokontroler
