Development of DCS SCADA Module for Factory I/O Pick and Place XYZ Case Based on Siemens S7-1200 PLC and HMI Excel Link
DOI:
https://doi.org/10.31963/intek.v11i1.4734Keywords:
DCS, SCADA, PLC Siemens S7-1200, HMI Excel Link, Pick and PlaceAbstract
The DCS SCADA course plays a significant role in the latest curriculum introduced at Politeknik ATI Makassar in 2022. However, the utilization of real plant instrumentation in industrial environments often proves costly. To overcome this cost barrier, this research develops a DCS SCADA module employing an industrial simulation application, namely the virtual plant Factory I/O, with a case study involving Pick and Place XYZ. This scenario entails the placement of boxes onto pallets using a three-axis robotic manipulator. The module utilizes the PLC Siemens S7-1200 as the control device and HMI Excel Link as the supervisory device. To detect the boxes and parts, two retroreflective sensors are employed, with three conveyors facilitating transportation and a robotic pick and place arm moving in three XYZ axes. Through integrated procedural testing, the system's performance evaluation demonstrates a 100% success rate (OK status).References
Lutfi and Muh. Yusuf, “Pengembangan Modul Trainer PLC Siemens S7-1200 pada kasus Sortir Station Berbasis Factory I/O.,” Politeknik ATI Makassar, 2022.
F. Firaz, A. I. Gunawan, and A. Tjahjono, “Vijeo Citect SCADA sebagai HMI Berbasis TCP/IP Multivendor Networking PLC,” EEPIS Final Proj., 2011.
S. W. Jadmiko, A. R. Al Tahtawi, and A. Munandar, “Aplikasi Jaringan Komunikasi Master Slave pada Simulator Input-Output Berbasis Multi PLC-HMI,” in Prosiding Seminar Nasional Teknik Elektro UIN Sunan Gunung Djati Bandung, 2020, pp. 489–500.
A. S. P. Ananda, I. M. I. Munadhif, I. R. Isa, R. Y. A. Ryan, and R. I. Rini, “Integrasi Sistem Komunikasi Modbus TCP/IP pada PLC Siemens S7-1200, ESP32, dan HMI,” J. Elektron. Dan Otomasi Ind., vol. 10, no. 2, pp. 234–244, 2023.
W. Tyler, “Automation.” [Online]. Available: https://learn.microsoft.com/en-us/cpp/mfc/automation?view=msvc-170
A. Sudirman, “PENGEMBANGAN MODUL TRAINER PLC SIEMENS S7-1200 PADA KASUS SORTIR STATION BERBASIS FACTORY I/O,” in Prosiding Seminar Nasional Teknologi Industri (SNTI), 2022, pp. 37–42.
S. Buwarda and Lutfi, “Development of DCS SCADA Teaching Module on A Pid-Based Water Level Control Case Using Labview and Factory I/O,” Inspir. J. Teknol. Inf. Dan Komun., vol. 12, no. 2, pp. 89–96, Desember 2022.
Muh. F. Sukirman, “Rancang Bangun Modul DCS untuk Interkoneksi PLC Multi Vendor pada Studi Kasus Palletezing System,” Tugas Akhir D3 Otomasi Sist. Permesinan Politek. ATI Makassar, 2023.
