Inverse Kinematic of 1-DOF Robot Manipulator Using Sparse Identification of Nonlinear System

Authors

  • Anisa Ulya Darajat Universitas Lampung
  • Umi Murdika Universitas Lampung
  • Ageng Sadnowo Repelianto Universitas Lampung
  • Resty Annisa Universitas Lampung

DOI:

https://doi.org/10.31963/intek.v10i1.4202

Keywords:

Manipulator, Sparse Identification, Nonlinear, Kinematic

Abstract

Robot Manipulator is the most robot used in industry since it can act like a human arm that can move objects. Research on robot manipulator has been widely carried out in various problems such as control systems, intelligence robots, degrees of freedom, mechanics-electronics systems and various other problems. In control systems there are studies to design of robot motion through kinematics. However, modeling the kinematic motion which has nonlinear characteristics will be more difficult if the number of degrees of freedom increases. To overcome this problem, this research will proposed sparse regression to modeling the kinematics of a robotic arm with the black box principle modeling. The results obtained indicate that the method The proposed one has the ability to identify robots manipulator with a fitness score of up to 100%. This matter shows that the proposed method can modeling the kinematic inverse of the manipulator robot without through complex calculations. From this research is expected can provide other research opportunities related to identification kinematics with the identification system method

Author Biographies

Anisa Ulya Darajat, Universitas Lampung

Electrical Engineering

Umi Murdika, Universitas Lampung

Electrical Engineering

Ageng Sadnowo Repelianto, Universitas Lampung

Electrical Engineering

Resty Annisa, Universitas Lampung

Electrical Engineering

References

A. Gasparetto, L. Scalera, A. Gasparetto, and L. Scalera, “A Brief History of Industrial Robotics in the 20th Century,†Advances in Historical Studies, vol. 8, no. 1, pp. 24–35, jan 2019. [Online]. Available:http://www.scirp.org/journal/PaperInformation.aspx?PaperID=90517http://www.scirp.org/Journal/Paperabs.aspx?paperid=90517

K. Daeinabi and M. Teshnehlab, “Industrial arc welding robot defect tracking system in automotive industry,†in Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation, ICMA 2007, 2007, pp. 3937–3941.

K. Fu, R. Gonzales, and C. S. Lee, “Robotics: Control, Sensing, Vision and Intelligence,†pp. 381–381, 1987.

B. S. Kim, S. H. Yang, J. D. Kim, and C. S. Cho, “Dynamic and kinematic analysis of 6-bar parallel robot,†2013 44th International Symposium on Robotics, ISR 2013, 2013.

J. D. Sun, G. Z. Cao, W. B. Li, Y. X. Liang, and S. D. Huang, “Analytical inverse kinematic solution using the D-H method for a 6-DOF robot,†2017 14th International Conference on Ubiquitous Robots and Ambient Intelligence, URAI 2017, pp. 714–716, 2017.

C. Liu, “Kinematical and Dynamic Analysis of 6-DOF Industrial Robot,â€Proceedings - 2016 9th International Symposium on Computational Intelligence and Design, ISCID 2016, vol. 1, pp. 32–35, 2016.

Z. Bian, Z. Ye, and W. Mu, “Kinematic analysis and simulation of 6-DOF industrial robot capable of picking up die-casting products,†AUS 2016 - 2016 IEEE/CSAA International Conference on Aircraft Utility Systems, pp. 41–44, 2016.

A. Patil, M. Kulkarni, and A. Aswale, “Analysis of the inverse kinematics for 5 DOF robot arm using D-H parameters,†2017 IEEE International Conference on Real-Time Computing and Robotics, RCAR 2017, vol. 2017-July, pp. 688–693, 2018.

L. Sardana, M. K. Sutar, and P. M. Pathak, “A geometric approach for inverse kinematics of a 4-link redundant In-Vivo robot for biopsy,â€Robotics and Autonomous Systems, vol. 61, no. 12, pp. 1306–1313, 2013.

H. Zhang, Q. Xia, J. Sun, and Q. Zhao, “A Fully Geometric Approach for Inverse Kinematics of a Six-Degree-of-Freedom Robot Arm,†Journal of Physics: Conference Series, vol. 2338, no. 1, p. 012089, 2022.

A. Gupta, “A Geometric Approach to Inverse Kinematics of a 3 DOF Robotic Arm,†undefined, vol. 6, no. 1, pp. 3524–3530, 2018.

S. L. Brunton, J. L. Proctor, J. N. Kutz, and W. Bialek, “Discovering governing equations from data by sparse identification of nonlinear dynamical systems,†Proceedings of the National Academy of Sciences of the United States of America, vol. 113, no. 15, pp. 3932–3937, 2016.

E. Kaiser, J. N. Kutz, and S. L. Brunton, “Sparse identification of nonlinear dynamics for model predictive control in the low-data limit,†Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 474, no. 2219, 2018.

K. Champion, B. Lusch, J. Nathan Kutz, and S. L. Brunton, “Datadriven discovery of coordinates and governing equations,†Proceedings of the National Academy of Sciences of the United States of America, vol. 116, no. 45, pp. 22 445–22 451, nov 2019. [Online]. Available: https://www.pnas.org/doi/abs/10.1073/pnas.1906995116

U. Fasel, J. N. Kutz, B. W. Brunton, and S. L. Brunton, “Ensemble-SINDy: Robust sparse model discovery in the low-data, high-noise limit, with active learning and control,†Proceedings of the Royal Society A, vol. 478, no. 2260, 2022.

Downloads

Published

2023-04-01

Issue

Section

ARTICLES