OPTIMALISASI KINERJA SOLAR WATER HEATER DENGAN PEMILIHAN MATERIAL KOLEKTOR SURYA PELAT DATAR

Abstrak

The purpose of this research is to optimize the performance of solar water heater with the selection of flat platesolar collector material on solar water heater system. The research is started with the design of solar water heater systemand to optimize the performance of the system then the selection of materials that can optimize system performance.System performance testing was conducted at 08.00 until 16.00 wita, by measuring input temperature, collector output,water temperature in the tank and also the intensity of the solar radiation. The result of measurement is used to get theperformance of solar water heater system. The collector material is a 1.2 mm thick aluminum plate and 5/8" diametercopper pipe and 5 mm thick glass while the tank material is 1.2 mm thick aluminum. Another material is a 2 mm steelplate for the manufacture of collector tubs and the outer layer of the tank, all parts of which can occur heat dissolutionare isolated and glued. The test results obtained the intensity of solar radiation and system efficiency tends to form aparabolic graph of according to the changes in time. Collector input temperatures, collector output temperatures and tanktemperatures as well as system input energy and output energy tend to form linearly-shaped graphs and proportional totime changes. The maximum efficiency of solar water heater system is 21.82% and occurs at 11.30 pm.