ANALISIS HASIL RANCANG BANGUN SISTEM GERAK ABADI PASANGAN RODA GIGI LURUS
Abstract
In this paper, the results of the design of a perpetual motion machine for electric power generation are used,which is to use the straight gear pair in the imbalance position and the addition of a mechanism that aims to supplyenergy to the system, which is then termed "semi-perpetual motion". It is expected that with the addition of external(mass) energy, the system will move continuously so that the shaft rotation (kinetic energy) obtained can be utilized todrive the generator of electrical energy. Based on the results of testing on the system, it can be concluded that the systembuilt still needs improvement, especially the factors that work on the components of interconnected teeth. The expectedtorque to provide a tangential force does not occur so that the system does not produce the mechanical energy of theshaft.References
Angrist, Stanley. 1968. "Perpetual Motion Machines". Scientific American (1). PP. 115–122.
Aspden H., 2004. The physics of Perpetual Motion. Energy Science Limited England.
Cengel, A. Y., & Boles, A. M. 2002. Thermodynamics An Engineering Approach, Fourth Edition. McGraw-Hill. New
York.
Direktorat Jenderal Geologi Dan Sumber Daya Mineral. 2013. Berita DJGSM: Pengembangan Energi Panas Bumi.
Januari 2013. Jakarta.
Kementerian Energi dan Sumber Daya Manusia. 2013 Pusat Data dan Teknologi Informasi Energi dan Sumber daya
Mineral. Kajian Supply Demand Energi.
Free Energy: Perpetual Motion Scams are at an All-Time High, What's New, APS. 5 April 2002.
Goldemberg, J. 2004. The Case for Renewable Energies. In: Proceeding International Conferrence for
Renewable Energies. February 2004, Bonn. Hal. 1-16.
Halliday, Resnick. 1998. Fisika Edisi Ke 3. Jakarta; Erlangga.
Khan, I., Amina, M., Masood, M.I., and Asadullah. 2014. Analysis of ‘free energy’ Perpetual Motion Machine System
Based on Permanent Magnets. International Journal of Smart Grid and Clean Energy. 3 (3): 334-339.
Jovan Marjanovic. 2011.†The Secret of Free Energy from the Pendulumâ€. Veljko Milkovic Research & Development
Center. May 05 2011, Novi Sad, Serbia.
Gajbhiye, M., Boke, M., Kelwadkar, A., and Mude, S. 2016. Electrical Energy Harvesting By Using Pendulum Power
Generator. International Research Journal of Engineering and Technology (IRJET). 3 (2): 595-599.
Ahmed, M.M., and Naaz, H. 2014. Power Generation through Gravity and Kinetic Energy. International Journal of
Scientific and Research Publications. 4 (1): 1-3.
Rajeswari, R.P., Sakthi, S., Bharathi, K., Sasikumar, M., and Srinivasan, S. 2015. Zero Point Energy Conversion for
Self-Sustained Generation. ARPN Journal of Engineering and Applied Sciences. 10 (10): 4326-4333.
Ambade, R.S., Prabhakar, R., Tayade, R.S. 2014. A Review on Gravity Power Generation. International Journal of
Innovative Research in Science, Engineering and Technology. 3(4):11084-11086.
Ruwanto, B. 2007. Asas-asas Fisika. Yudistira. Yogyakarta.
Chaudhari, S.V. 2015. Collaboration of Gravity Based Theories for Power Generation. International Journal of
Innovative Research in Science, Engineering and Technology. 4(8): 7317-7320.
Sularso dan Suga, K. 2002. Design of Machine Elements. Pradnya Paramita. Jakarta.
Tipler. 2001. Fisika Sains dan Teknik. Erlangga. Jakarta.
Troy D., Philip. 2004. Balance This. San Antonio, Texas.
Tsaousis, D. 2008. Perpetual Motion Machine. Journal of Engineering and Technology Review I. pp. 53-57.
Vidhan Srivastava, Sumit Chaudhary, Shailesh M. Pandey, Kulvinder Rana. 2012. Gravity Power Generation. IJMRS.
International Journal of Engineering Sciences. 1(3).
Priyambodo, T.K., Jati, B.M.K., 2008. Fisika Dasar. Andi. Yogyakarta.
