RANCANG BANGUN SISTEM OTOMATISASI PENGISIAN ULANG AIR GALON
Abstract
In the application of the system of filling the gallon water load cell will provide data on the volume of water
to Arduino, if the volume of water has been met then the pump will stop. Arduino will send every change data to the
relay. The results that have been achieved are the Arduino-based refill water filling control devices capable of filling
water in gallons of 5 liters, 10 liters, and 19 liters automatically. Read data in the form of an analog voltage from the load
cell sensor, The charging process takes place by activating imaginer relays and 5 Volt relays, converting the average
yield data to Kg. Errors on the LCD display with an average of 1.26% and the system is still in a stable state that the
contents of gallon water do not spill.
to Arduino, if the volume of water has been met then the pump will stop. Arduino will send every change data to the
relay. The results that have been achieved are the Arduino-based refill water filling control devices capable of filling
water in gallons of 5 liters, 10 liters, and 19 liters automatically. Read data in the form of an analog voltage from the load
cell sensor, The charging process takes place by activating imaginer relays and 5 Volt relays, converting the average
yield data to Kg. Errors on the LCD display with an average of 1.26% and the system is still in a stable state that the
contents of gallon water do not spill.
Full Text:
PDFRefbacks
- There are currently no refbacks.