PENGGUNAAN SLAG NIKEL DALAM PEMBUATAN PAVING BLOCK

Nur Aisyah Jalali, Hasmar Halim, Agus Salim

Abstract


This study aims to determine the amount of nickel slag in paving blocks, compressive strength, and water
absorption. The benefits are to reduce environmental pollution and the use of sand and cement. Paving blocks are made
from a mixture of cement, fine aggregate (sand and nickel slag), and water. The test specimens (21c10.5x8 cm) have a
composition of 1:3, 1:4, and 1:5 (volume ratio), and slag level of 0%, 25%, 75%, and 100% against the sand. The results
show that most of the specimens meet the required size. Nickel slag can increase compressive strength, where the slag
level of 75% and 100% enter the quality I, and can reduce water absorption.

Full Text:

PDF

References


Badan Standardisasi Nasional. 2003a. Metoda, Tata Cara, dan Spesifikasi, Bagian 2: Batuan, Sedimen,

Agregat. Jakarta.

----------. 2003b. Metoda, Tata Cara, dan Spesifikasi, Bagian 13: Kayu, Bahan Lain, Lain-lain. Jakarta.

British Standard 6717 Part I. 1998. Precast Concrete Paving Blocks.London

Ferdiansyah dan Fauzan Achmad Anshary. 2015. Kuat Tekan dan Penyerapan air Paving Block dengan

Menggunakan Slag Nikel. Tugas Akhir pada Politeknik Negeri Ujung Pandang: Tidak diterbitkan.

http://biz.kompas.com/read/2016/03/15/080000428/Ingin.Tingkatkan.Produksi.Nikel.ANTAM.Lakukan.Uji.

Coba.CFPP (Online), (diakses tanggal 05 Oktober 2016).

http://www.antam.com/index.php?option=com_content&task=view&id=32&Itemid=38 tentang penanganan

limbah PT. Antam. (Online), (diakses tanggal 26September 2016).

Sugiri, Saptahari. 2005. “Penggunaan Terak Nikel sebagai Agregat dan Campuran Semen untuk Beton Mutu

Tinggiâ€. Dalam Infrastruktur dan Lingkungan Binaan, 1 (1).


Refbacks

  • There are currently no refbacks.