Metode FMECA (Failure Modes, Effect, and Criticallity Analysis) untuk Penentuan Prioritas Pemeliharaan dan Pencegahan Gangguan pada Penyulang 20 kV di Wilayah Kerja PT. PLN (Persero) ULP Karebosi
DOI:
https://doi.org/10.31963/elekterika.v20i1.4296Keywords:
FMECA, Reliability, Maintenance Priority, Disturbance Prevention, 20 kV FeedersAbstract
Failure Modes, Effect, and Criticality Analysis is an analytical method to determine the cause of disturbance on 20 kV feeders in Unit Layanan Pelanggan Karebosi’s area of responsibility that will be used later to prioritize maintenance and prevention efforts. To determine the priority, the rating of severity, occurrence, and detection of each cause of disturbance recorded during the 2022 period is needed to be known beforehand. The cause of disturbance is prioritized based on the results of RPN (Risk Priority Number) and Criticality Analysis. Causes of disturbance that need to be prioritized for maintenance and prevention efforts are medium-voltage equipment, medium-voltage components, natural disasters, and third-party activity. The result from this analysis is to be used for reliability improvement planning in the futureReferences
U. Eminoglu and R. Uyan, “Reliability Analyses of Electrical Distribution System: A Case Study,†International Refereed Journal of Engineering and Science (IRJES), vol. 5, no. 12, pp. 94–102, 2016.
M. Jufrizel and R. Hidayatullah, “Analisa Keandalan Sistem Distribusi 20KV Menggunakan Metode Section Technique dan Ria – Section Technique pada Penyulang Adi Sucipto Pekanbaru,†Seminar Nasional Teknologi Informasi, Komunikasi dan Industri (SNTIKI), vol. 9, pp. 417–423, 2017.
Republik Indonesia, Undang - Undang Republik Indonesia No. 11 Tahun 2020 tentang Cipta Kerja Inkonstitusional Bersyarat. Indonesia, 2020. Accessed: Jul. 12, 2023. [Online]. Available: https://uu-ciptakerja.go.id/wp-content/uploads/2020/11/Salinan-UU-Nomor-11-Tahun-2020-tentang-Cipta-Kerja.pdf
A. Fatoni, R. S. Wibowo, and A. Soeprijanto, “Analisa Keandalan Sistem Distribusi 20 kV PT.PLN Rayon Lumajang dengan Metode FMEA (Failure Modes and Effects Analysis),†Jurnal Teknik ITS, vol. 5, no. 2, pp. 462–467, 2017, doi: 10.12962/j23373539.v5i2.16150.
PT. PLN (Persero), Kriteria Disain Enjinering Konstruksi Jaringan Distribusi Tenaga Listrik, vol. 1. 2010.
Perusahaan Listrik Negara, “SPLN 68-2 1986,†1986. https://pt.scribd.com/doc/215461581/spln-68-2-1986# (accessed Jan. 18, 2023).
D. Morte, “Electrical Distribution Maintenance Fundamentals,†2016. Accessed: Jan. 17, 2023. [Online]. Available: https://www.anixter.com/content/dam/Suppliers/Schneider%20Electric/998-2095-04-28-16AR0_EN.pdf
A. Rahman and F. Fahma, “PENGGUNAAN METODE FMECA (FAILURE MODES EFFECTS CRITICALITY ANALYSIS) DALAM IDENTIFIKASI TITIK KRITIS DI INDUSTRI KEMASAN,†Jurnal Teknologi Industri Pertanian, vol. 31, no. 1, pp. 110–119, Apr. 2021, doi: 10.24961/j.tek.ind.pert.2021.31.1.110.
R. Y. Hanif, H. S. Rukmi, and S. Susanty, “Perbaikan Kualitas Produk Keraton Luxury di PT.X dengan Menggunakan Metode Failure Mode and Effect Analysis (FMEA) dan Fault Tree Analysis (FTA),†Jurnal Online Institut Teknologi Nasional Juli, vol. 03, no. 03, pp. 137–147, 2015.
Metrolinx, “FMECA (Failure Modes, Effects, and Criticality Analysis),†Metrolinx RAMS (Reliability, Availability, Maintainability and Safety) Standards. Ontario, Jul. 2020.
SIEMENS, “How to conduct a failure modes and effects analysis (FMEA),†2016. Accessed: Feb. 03, 2023. [Online]. Available: www.siemens.com/polarion
