ADSORBSI LOGAM Cu(II) DAN METHYLEN BLUE MENGGUNAKAN SILIKA MESOPORI SBA-15
Abstract
In this study, the synthesis of mesoporous silica SBA-15 via hydrothermal treatment has been investigated by
using Pluronik 123 as a direct structure agent and TEOS as precursor. Characterization was carry out through BET
methode to calculate surface area, pore diameter, and pore volume. The results showed that the surface area of SBA-15
948 m2/g, pore volume 1.305 cc/g and pore diameter 55 Ã…. The maximum percentage removal of Cu(II) and methylene
blue were 78% and 76%, respectively. The amount of capacity adsorption of SBA-15 were 76,4 mg/g for MB and 1532
mg/g for methylene blue. The present investigation introduced a new material silica mesoporous SBA-15 as an efficient
adsorbent for removal of Cu(II) and methylene blue
using Pluronik 123 as a direct structure agent and TEOS as precursor. Characterization was carry out through BET
methode to calculate surface area, pore diameter, and pore volume. The results showed that the surface area of SBA-15
948 m2/g, pore volume 1.305 cc/g and pore diameter 55 Ã…. The maximum percentage removal of Cu(II) and methylene
blue were 78% and 76%, respectively. The amount of capacity adsorption of SBA-15 were 76,4 mg/g for MB and 1532
mg/g for methylene blue. The present investigation introduced a new material silica mesoporous SBA-15 as an efficient
adsorbent for removal of Cu(II) and methylene blue
Full Text:
PDFRefbacks
- There are currently no refbacks.