Pengaruh Air Laut sebagai Air Pencampur dan Air Perawatan pada Karakteristik Pasta Semen dan Mortar
DOI:
https://doi.org/10.31963/intek.v5i1.196Abstract
The goal of this research is to investigate the influence of seawater as mixing water and curing water on characteristics of cement paste and mortar. Research was conducted with making mixtures of cement paste and mortar using two kind of cement, Portland Composite Cement (PCC) and Pozzolana Portland Cement (PPC) with seawater as mixing water. Characteristics of fine aggregate and characteristics of cement paste with seawater mixing were investigated. Furthermore, 144 cube mortar specimens in size of 5 cm x 5 cm x 5 cm in four series mortar mixtures were casted according with SNI 03-6825-2002. At 24 hours after specimens were casted, cube mortar specimens were cured in tap water curing (TC), seawater curing (SC) and air curing (AC). After achievement at certain curing day of 3, 7, 14 and 28 days, cube mortar samples were tested in compressive strength. Results concluded that seawater mixing improves compressive strength of mortar up to 28 days in all curing conditions, TC, SC and AC. Moreover, strength of mortar is not affected by type of curing water, tap water or seawater.References
N. Otsuki, D. Furuya, S. Saito, and Y. Tadokoro, “Possibility of sea water as mixing water in concrete,†[Proceeding of 36th Conference on Our world in Concrete & Structures, Singapore, 2011].
Bureau of Indian Standards, Plain and Reinforced Practice, 4th revision: India, 2000, p 14.
Japan Society of Civil Engineers, Standard Specifications for Concrete Structures-2002: Material and Construction: JSCE Japan, 2002, p 75.
L. Bertolini, B.Elsener, P. Pedeferri, E. Redaelli, and R. Polder, Corrosion of Steel in Concrete, Wiley-VCH Verlag GmbH & Co. KGaA, 2013.
Adiwijaya, D. Yamamoto, A. Dasar, H. Hamada and Y. Sagawa, “Effects of seawater mixing and curing on strength and carbonation of fly ash concrete,†Journal of Structures and Materials in Civil Engineering No. 29, pp. 97-103, December 2013.
Adiwijaya, H. Hamada, Y. Sagawa, dan D. Yamamoto, “Effects of mineral admixtures on strength characteristics of concrete mixed with seawater,†[Proceeding of The 6th International Conference of Asian Concrete Federation (ACF), Seoul, 2014].
R. Puspitasari, Studi Kekuatan Mortar Dengan Menggunakan Air Tawar Dan Air Laut Sebagai Air Pencampur, Laporan Tugas Akhir Universitas Hasanuddin: Indonesia, 2014.
TU. Mohammed, H. Hamada and T. Yamaji, “Performance of seawater-mixed concrete in the tidal environment,†Journal of Cement and Concrete Research 34, pp. 593-601, 2004.
Badan Standarisasi Nasional, Metode Pengujian Kekuatan Tekan Mortar Semen Portland untuk Pekerjaan Sipil, SNI 03-6825-2002: Indonesia, 2002, p 10.
Badan Standarisasi Nasional, Spesifikasi Air Pencampur yang Digunakan dalam Produksi Beton Semen Hidraulis, SNI 7974-2013: Indonesia, 2013, p 12.
