Determining Interval Time of Maintenance in Bosowa Cement Indonesia using Reliability Method

Muhammad Arsyad Suyuti, Rusdi Nur

Abstract


Maintenance for machining and production facility is an important aspect to ensure a smooth production process. During this time, it was performed regular maintenance based on technical advice from supplier’s engines which just shows things in general without considering the actual operating conditions. This paper aims to plan the maintenance strategies for the Finish Mill unit based on reliability analysis by considering the target system reliability and cost of improving reliability. The data distribution obtained the most appropriate distribution. Based on the data obtained distribution parameters, then the function of the reliability of each part an be determined so that the value of the reliability of each part and the overall system for a specific time period can be calculated. The results showed that the failure or breakdown Mill Finish Unit was majority caused by the part of 561.BM1, 531.WF1, 531.BC6, 531.BC2, 531.BC1, 561.SR1 and 531.BC3. it means that need to focus o the reliability analysis to allocate their parts.


References


CE. Ebeling, An introduction to reliability and maintainability engineering. Long Grove, Waveland Press, 2010.

T. Onisawa, “An application of fuzzy concepts to modeling of reliability analysis,” Fuzzy Sets and Systems, vol. 37, no. 3, pp. 267-286, 1990.

B. Cappelle and E. E. Kerre, “Computer assisted reliability analysis: an application of possibilistic reliability theory to a subsystem of a nuclear power plant,” Fuzzy Sets and Systems, vol. 74, no. 1, pp.103-113, 1995.

K. Y. Cai, Introduction to Fuzzy Reliability. Boston: Kluwer academic publishers, 1996.

C. Cremona and Y. Gao, “The possibilistic reliability theory: theoretical aspects and application,” Structural Safety, vol. 19, no. 2, pp. 173-201,1997.

L. V. Utkin and S. V. Gurov, “A general formal approach for fuzzy reliability analysis in the possibility context,” Fuzzy Sets and Systems, vol. 83, no. 2, pp. 203-213, 1996.

J. Long, R A. Shenoi, and W. Jiang, “A reliability-centred maintenance strategy based on maintenance-free operating period philosophy and total lifetime operating cost analysis” Proc. IMechE Vol. 223 Part G: J. Aerospace Engineering, 2009

Zeng, Zhiguo, et al. "Measuring reliability during product development considering aleatory and epistemic uncertainty." Reliability and Maintainability Symposium (RAMS), 2015 Annual. IEEE, 2015.

Noorossana, Rassoul, and Kamyar Sabri-Laghaie. "Reliability and maintenance models for a dependent competing-risk system with multiple time-scales." Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability (2015): 1748006X14565842.




DOI: http://dx.doi.org/10.31963/intek.v3i2.52

Refbacks

  • There are currently no refbacks.


Publisher by:

Politeknik Negeri Ujung Pandang
Kampus 1 Gedung Administrasi Lantai II
Jalan Perintis Kemerdekaan KM.10 Tamalanrea
Makassar 90245
E-mail: intek@poliupg.ac.id

INTEK Indexed by:

g61g61g61g61g61g61g61g61g61

 Member of :

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 View My Stats